Author: aditya

Analysis: Silver Conductive Adhesive Paste

Silver Conductive Adhesive is used to create a thin, smooth, flexible and adherent film that has high electrical conductivity and which can be applied on a variety of substrates, including plastic, paper, wood, textiles, glass, ceramics, and metals. It can be applied by brushing, spraying, dipping or pencil and dries quickly at room temperature. The electrical conductivity required is between 0.1 W/cm2 and 1.0 W/cm2.

This article is all about the use of Silver Conductive Adhesive for different purposes.

Continue reading “Analysis: Silver Conductive Adhesive Paste”

The importance of hand sanitizer at the workplace.

Simple actions can save so many lives! Indeed, it’s true. Placing automatic hand sanitizer at the workplace is need of the hour. Why? As we are well aware that the pandemic spreads so fast with the touch and office is a place where the employees everyday working makes them so much exposed to bacteria/germs. For instance; Employees use their hands during every given workday to write a paper, shake hands with a new customer or peers, open doors and much more. These actions definitely expose hands to harmful bacteria and germs. Illness is related to loss of productivity, which causes monetary loss to employers. Considering that 80 percent of all diseases are hand borne, this is why it’s smart to have hand sanitizer around at the workplace!

Continue reading “The importance of hand sanitizer at the workplace.”

All you need to know about magnetic stirrers before you purchase one

Magnetic stirrers are devices widely used in laboratories consisting of a rotating magnet or a stationary electromagnet that creates a rotating magnetic field. This device is used to make a stir bar, immerse in a liquid, quickly spin for stirring or mixing a solution.  

Continue reading “All you need to know about magnetic stirrers before you purchase one”

Chemical Vapour deposition( CVD) Transfer of Technology to ANTS Group at IIT-BHU

The technology was transferred to the ANTS group (MSME 2018 National Award Winner) for commercialisation to the benefit of society and research at the Indian Institute of Technology-BHU, which has developed world-class technical processes. In this regard, on Monday, a Memorandum of Understanding (MoU) was signed in between the IITs and the ANTS group. Dr. Shantanu Das and his team developed the technology with collaborated help of the Department of Ceramic Engineering, Indian Institute of Technology and M/s ANTS Ceramic Prof. Ltd. It has been acquired by M / s ANTS Innovation Pvt. Ltd.,  Maharashtra. The meeting was organized for its commercial production. In this meeting, the director of the institute, Prof. PK Jain, Prof. R. Prakash, Dean (RD), Dr. SK Das Inventor, Prof. Vinay Kumar Singh, Head of the Department, Ceramic Department and Sabyasachi Roy and Tushar Gothi, Director, M / s ANTS Innovation Pvt. Ltd. was present. 

Continue reading “Chemical Vapour deposition( CVD) Transfer of Technology to ANTS Group at IIT-BHU”

Alumina Crucible Care, Use and Instructions

At Ants Ceramics we expect to you get the very best out of every crucible we provide. However, a key factor to determine the performance and lifespan of a crucible is how the crucible is handled, operated and maintained at the customer’s end. So here we have created a Alumina Crucible Care Guide to take care of your alumina crucibles.  

Continue reading “Alumina Crucible Care, Use and Instructions”

KBr Pellet Preparation for IR Spectroscopy using Hydraulic Pellet Press

KBr Pellet Preparation or sample preparation the most important part for IR spectroscopy. Sample should be transparent to IR radiations so it allows the radiations to pass through them. So salts like KBr, NaCl, AgCl are used for mixing of sample in order to obtain the accurate IR spectrum of a sample with sharp peaks, good intensity with high resolution.

Continue reading “KBr Pellet Preparation for IR Spectroscopy using Hydraulic Pellet Press”

× How can I help you?